Outlet 🎉 Wicked Edge Sharpener Pro-Pack II (USA) Knife Sharpeners 😀

The Pro-Pack II now includes the 1500/2000 Grit Diamond Stones and the 4/2 Micron Diamond Emulsion and Leather Strops Pack as well as the Advanced Alignment Guide. As we’ve been able to develop diamond stones at higher grits as well as diamond emulsions, Wicked Edge has found the results of using these is equal to or better than the previous combination of abrasives and can be completed in a shorter amount of time.

 

• Made in the USA
• WE120 Sharpener combined with more abrasives, an Aluminum Base, and a Digital Angle Gauge
• Sharpens a very wide assortment of knives
• Wide angle range for added versatility
• Fine angle adjustment and control
• Ability to adjust angles independently for asymmetrical grinds
• Vise is operated with an included Allen key
• Parts are fully modular, making them interchangeable with upgrades for more advanced sharpening capabilities
• Can sharpen blades up to 15″ long
• Can clamp blades up to ⅜” thick (longer screws may be used to enable clamping of even thicker blades)
• Angle Range: 13-35 degrees per side (26-70 degrees inclusive)
• Main angle adjustment in 1 degree increments, and micro-angle adjustment in 0.05 degree increments
• Sharpener’s angle markings are calibrated for knife’s edge at 5/8″ over top of vise
• Minimum knife height for stones to clear vise at lowest angle is 5/8″ over top of vise. Low Angle Adapter (sold separately) required to reach low angles on smaller knives
• Guide Rods: 8″
• Product Weight: 18 LBS
• Precision Sharpener WE120

Includes:

• Wicked Edge Precision Sharpener – WE120​(100/200 and 400/600 Grit Diamond Stones included)

• 800/1000 Grit Diamond Stones Pack

• 1500/2200 Grit Diamond Stones Pack

• 4/2 Micron Diamond Emulsion and Leather Strops Pack

• Advanced Alignment Guide

• Wixey WR300 Digital Angle Gauge

• Aluminum Base

The Pro-Pack II is compatible with the following items:

• All Wicked Edge sharpening stones and strops
• Hardware Upgrade Kits (for more detailed information about the compatibility with Upgrade Kits, use the Upgrade Selection Guide)
• Low Angle Adapter
• Scissor Attachment
• Chisel Attachment
• Advanced Alignment Guide
• Safety Shields
• 10″ and 12″ Guide Rods
• Granite Base (Aluminum Base is included)
• Hard Carrying Case
• Hard Carrying Case with Wheels and Retractable Handle
• Vise Key
• Depth Key

The WE120 is not compatible with the following items: 

• Generation 3 Jaws for 1/4″ Blades
  Note: Upgrade to jaws is not needed. The WE120 is built to accommodate 1/4